Listings

  • 2024 Manitech 1500 kg telescoping loader

    • n/a
    • Hyd.
    $52,000

    FEATURE

    SIZE / DETAILS

    Term No. ER1500F
    Net Weight 4000kg
    Bucket Capacity By Default 0.52m³
    Optional Buckets Availiable (CBM) – Please Mark All Sizes Available 0.8/1.0/1.3/1.5m³
    Rated Load (Loading Capacity) 1500kg
    Max.Tractive Force 33kn
    Max.Breakout Force 28kn
    Max.Gradeability 28°
    Max. Dumping Height 3155mm
    Max.Lifting Height 3813mm
    Dumping Distance 1449mm
    Overall Dimension (L×W×H) 7060*2150*3096mm
    Engine Model by Default Xichai A498BT1
    Number of Cylinder 4
    Rated Power 36.8kW
    More Details   New Vehicle

  • New 2024 Zetor HL25 tractor c/w loader

    • n/a
    $24,900

    MODEL M25HTL M25HTLB
    Engine T4F, Yanmar, 3–Cylinder
    Engine HP 25.3 (18.86 kw)
    Transmission 2-Range HST, Cruise Control and Auto Throttle, Dual Pedals FWD/REV
    Power Take-Off (PTO) Hydraulic Independent 2-Speed: 540 Rear, 2500 Mid
    PTO Engagement Independent, Electric–over–Hydraulic
    PTO HP 20.2 (15.1 kw)
    3-Point Hitch HD CAT 1, with HD Turnbuckle/Chain Sway Adjustment, Position Control
    3-Point Hitch Lift Capacity 1,325 Lbs. (601 kg)
    Hydraulic Total Flow 6.95 GPM (26.31 L)
    Power Steering Flow 2.3 GPM (8.7 L)
    QA Front End Loader Quick Attach with Dual Lift and Dual Bucket Cylinders
    Loader Bucket 53“ Bucket, Skid Steer Carrier (Optional Pin-on)
    Loader Max Lift Height 77 in (1956 mm)
    Loader Max Lift Capacity 1,325 Lbs. (601) kg)
    Full Subframe Backhoe & 12“ Bucket – Standard
    Backhoe Digging Depth – 78 inch (1981 mm)
    R4 Tire Size Front: 23 x 8.50 – 12 / Rear: 12 – 16.5 R4 Industrial
    R3 Turf Tire Size Front: 23 x 8.50 – 12 / Rear: 29 x 12.50 – 16.5 R3 Turf
    Optional Equipment 60“ Drive-over, Shaft Drive Mid-Mount Mower
    Optional Accessories 1-Rear Remote Valve and or Front End Loader 3rd Function
    Package Weight 2,400 Lbs. (1088 kg) 3,325 Lbs. (1508 kg)

    More Details   New Vehicle

  • New 2024 Zetor 150h.p. tractor

    • n/a
    • Zetor
    $225,000

    Specifications HD Series Tractors

    Parameters Values
    Transmission Design 30/30 Power Reverser
    Transmission Features Powershift, Auto or Manual Select Mode; Electronic DeClutch
    Transmission Clutch Multi-Disc Wet Clutch Packs
    Power Take-Off (PTO) 540/540E/1000/1000E
    PTO Engagement Electro-Hydraulic
    PTO Clutch Multi-Disc Wet Clutch Pack
    CAT II/IIIN  3-Point Hitch HD Telescopic Stabilizers, HD Quick Hitch Lower Ends
    Drawbar HD Sliding and Swinging with Hammer Strap
    3-Point Hitch Control ELC (HITCHTRONIC™) Controls, Position • Draft • Mix, Fender Button Controls
    3-Point Hitch Lift Capacity 18,400 lbs @ Hitch Point / 14,400 lbs @ 24“ Behind Hitch Point
    Hydraulic Flow to Remotes 23 gpm
    Rear Valves 4 Sets, Electronic Control with Flow Dividers and Flow Control
    Total Hydraulic Flow 30 gpm
    QA MSL Front End Loader ZM248
    Standard Loader Features Self-Leveling; Third Function;  Soft-Ride; Hydraulic Tool Carrier Lock
    Loader Lifting Height @ Pivot Point 162 in.
    Loader Max Lift Capacity @ Pivot Point 6,430 lbs
    Tractor Weight (Without Loader) 13,475 lbs

    Front hitch and PTO

    More Details   New Vehicle

  • 2005 Tarnel 36 ft highboy trailer

    • n/a
    $14,900 Canadian dollars

    2005 Tarnel, high boy flat deck trailer, tandem wheels, tandel axles, st235/80r16 tires , wood deck, steel wheels.

    More Details   Used Vehicle

  • 2006 IHC 7500 Swab rig

    $129,900 Canadian dollars

    2006 IHC Model 7500 extended cab swab unit, DT570 Engine, 13 speed eaton trans., 13,972 hours, 315/80r22.5 front tires, 75% tread left on alum wheels, 11r22.5 rear tires , 75 5 tread left on alum wheels, DA Welding swab unit model 28D s/n 285407100521, c/w drum type draw works, 1/2 inch line, hose and hose reel, tools .

    More Details   Used Vehicle

  • 2006 IHC 7400 Swab unit

    $129,900

    2006 IHC model 7400 swab unit, DT570 IHC engine, Auto trans., 315/80r22.5 Front tires, 75 % tread left, alum wheel, 11r22.5 rear tires, 75% tread left on steel rims. 17,310 engine hours , c/w DA Welding swab unit model 30D, s/n 303404040626, drum type draw works c/w 1/2 inch line, hoses c/w hose reel, tools, mast cert good till April 25/2024.

    More Details   Used Vehicle

  • 2) 2021 Amphibious Excavator Bobcat E50

    • n/a
    $0

    Amphibious 2021 Model E50

    762 hours

    Long Stick Bobcat Excavator with 2′ boom extension

    catwalk, and hydraulic thumb mounted on pontoons.

    Call for pricing

    More Details   New Vehicle

  • 1) 2019 Amphibious Excavator CAT 320C

    • n/a
    $0

    2019, With amphibious chassis
    very good condition

    2420 hours.

    Net weight 30,000 kg

    Digging Depth 14 m. Dump Height 18 m. Bucket volume: 1 m3

    Call for pricing

    More Details   New Vehicle

  • 2023 M-tech 5.5t Telescoping wheel loader

    $62,900

    New 2023 M-tech telescoping wheel loader, Cummins engine, dual range forward/reverse trans., cab, a/c, heater, am/fm radio, back up and forward cameras, telescoping boom, c/w quick detach pallet for with hyd. slide arms, quick detach bucket, 2 years warranty, parts and service in Lloydminster. Attachments from skid steer fit on the quick detach.

    More Details   New Vehicle

  • 2012 Kenworth T800

    • 1,393,232 km
    • 18 Speed auto
    $184,900

    2012 Kenworth model T800, 62″ mid roof sleeper, 550 Cummins engine, rebuilt less than 1000 ago,  18 Speed alltra shift trans., 46,000 rears, 4:10ratio, 11r24.5 front tires on alum wheels, 95% tread left, 11r24.5 rear tires on alum wheels, 95% tread left, fridge, micro wave, Espar heater, dual s.s. exhaust, Dual s.s. breathers, beacon lights,    fifth wheel, half fenders, like new hydraulic driven T&E transfer pump, hoses, fittings, sask. safety good till sept 30/2023.

    More Details   New Vehicle

  • 2007 T600 Kenworth

    • 1,684,396 km
    • 18 speed
    $74,900 Canadian dollars

    2007 T600 Kenworth , C13 Cat engine, recent rebuild, 18 speed trans, 40,000 rears, full lock ups, 62 ” bunk, dual exhaust, front roo bumper, 11r22.5 tires, front 75% on alum wheels, rear 75% on alum wheels, half fenders, fifth wheel, wet kit, hydraulic drive T&E pump, hydraulic cooler, hoses, espar heater, new safety at time of sale.

    More Details   Used Vehicle

  • 2005 Kenworth T800 Flushby

    $199,000 Canadian dollars

    2005 Kenworth T800 flushby unit, C15 cat engine, 18 speed, 46,000 rears, approx 213646 kms, 6155 Hours, 385/65r22.5 front tires on alum, 11r24.5 rear tires on alum, alum front roo bumper, dual stacks, dual breathers, Online model 50/50 flushby unit, s/n 24641, free standing mast, HL-25 working winch, Pl-5 cat line winch, 1997 Advance tank, re certified in 2002, 1.4/7.5 meter split, TC=306 Al crude spec,  wet kit, load pump

    More Details   Used Vehicle

  • 2009 Western Star Rod rig

    $399,000 Canadian dollars

    2009 Western Star model 4900SA single front, tri-drive rear, rod rig, C15 475 cat engine, 18 Speed eaton trans., 445/65r22.5 front tires, 75% tread left, alum wheels, 11r24.5 rear tires, 75% tread left, alum wheels, approx. 15,000 hours, c/w SS rig and Equipment 2009 rod rig, Model 6B54-50 s/n 09-0043, 54 ft. mast, 50,000 lb. pull, rod board, triplex pump, hyd. pump and tank, 2009 Hamm 6.5 cube tank, 412 code, HL-25 Pullmaster working winch, PL-5 Pullmaster catline winch, working floor, proheat.

    More Details   Used Vehicle

  • National 300 Crane c/w Deck

    • n/a
    $12,900

    2007 National 300 37 ft crane, drop box, wet kit, hoses, crane smart crane saver, deck and tool boxes.

    More Details   New Vehicle

  • Coil tubing wet kit

    • n/a
    $14,900

    Coil tubing wet kit for intermediate coil tubing rig c/w Fabco drop box, hydraulic motor and tank, Inhibitor tank, nitrogen tanks, complete unit in good working condtion.

    More Details   New Vehicle

  • 2004 Kenworth Tandem/tandem flusbhy

    $259,000 Canadian dollars

    2004 Kenworth model T800 tandem/tandem flushby unit, dual exhaust, dual s.s. breathers, alum. roo front bumper, C-15 Cat engine, 18 speed eaton trans., new way air ride, full lockers, 425/65r22.5 front tires on alum wheels, 50% tread left, 11r24.5 rear tires on alum wheels, 50 % tread left, c/w Online Rig & Equipment flusby unit model 54-50, s/n 24633, 50,000 lb rating, free standing, slant compatible, level four done April/2020, Wabash tank, TC-406 Ms , s/n 65641061G12003624, Gardner Denver Tee 3×5 triplex pump, 5,000 lb rating, Pull master HL-25 working winch, PL-5 cat line winch, Hydraulic driven load pump and hoses.

    More Details   Used Vehicle

  • 2011 Rankin enclosed Mechanics trailer

    $24,900

    2011 Rankin Industries enclosed fifth wheel mechanics trailer, air tank & compressor, meg welder, metal laythe, tool boxes, tools, press drill, shelving, 2-5,000 lb axles, 235/75R15 tires, generator. everything you need to do remote repairs. fully equipped.

    More Details   Used Vehicle

  • 2002 Western Star Tandem/tandem Flushby

    $249,900 Canadian dollars

    2002 Westrern star tandem/tandem flushby, Cummins N14 engine, 15 speed trans.,  tandem front axle, 385/65r22.5 front tires on alum wheels, 11r24.5 rear tires on alum wheels, hendrickson rubber block suspension, Online flushby unit, 44 ft mast, 50,000 lb pull, slant compatible, Pullmaster HL-25 working winch, PL-5 catline winch, Gardner denver 3×5 Tee pump, Advance 9M3 tank, weight indicator, hydraulic drive load pump and hoses, tool boxes and tools

    More Details   Used Vehicle

  • 2005 Kenworth T800 Flushby

    $349,900 Canadian dollars

    2005 Kenworth flushby, Dual s.s exhaust, Dual s.s. breathers, alum front bumper, Kenworth air ride, 425r65x22.5 front tires on alum wheels, 11r24.5 rear tires on alum wheels, 30,786 engine hours showing, Lash. Ent. flushby unit , 47 ft. mast, 65,000 lb .rating, slant compatible, 3×5 gardner denver TEE triplex pump, Advance 8m3 tank, 406 crude spec., Pullmaste HL-25 working winch, Pl-5 catline winch, Maxilift model 350-2-K crane, tool boxes c/w tools, weight indicator,

    More Details   Used Vehicle

  • 2002 Kenworth T800 Flushby

    $159,000 cad

    C/w dual exhaust, dual s.s. breathers, beacon lights, 385/65r22.5 front tires, 75% tread left, alum wheels, 11r24.5 rear tires, 75% tread left, alum wheels, 46,000 rear axles , 4:33 ratio, full lockers, hendrickson walking beam suspension, 2002 Online Flushby unit model 47-50, 47 ft. mast, slant compatible, 50,000 lb rating, pullmaster HL-25 working winch, PL-5 catline winch, Gardner Denver TEE 3×5 triplex pump, 2002 Wabash 10 M3 tank, 406 AL crude , 12/13 PVIK, Maxilift model 027 crane, finch level monitors, tool boxes. weight indicator.

    More Details   Used Vehicle

  • 2013 IHC 5900 Paystar Flushby

    $159,000 cad

    C/w dual exhaust, dual s.s. breathers, 425/65r22.5 front tires, 50% tread left, alum wheels, 11r24.5 rear tires, 75% tread left, alum wheels, new way air ride, Gardner Denver triplex pump (missing parts), 1997 Wabash 11m3 tank, two compartments, recertified in 2013, TC 306 code, Sundre Motors flushby unit model 42-50, 42 ft mast , 50,000 lb rating, slant compatible, Pullmaster HL-25 working winch, PL-5 catline winch, Maxilift model 330 crane, tool boxes,

    More Details   Used Vehicle

  • 2005 Western Star Rod rig

    $349,000 cad

    C/w Cat C15 475 engine, 18 speed, 20,000 lb front axle, 69000 lb rear axle, 4:30 ratio, 445/65r22.5 front tires, 75% tread left, 11r24.5 rear tires 75% tread left all on alum buds, dual exhaust, dual s.s. breathers, airliner air ride, 23,057 hours, online flushby unit, 50 ft mast c/w rod board, 50,000 lb rating, free standing, Gardner denver 3×5 triplex pump, Hamm’s 10m3 two compartment tank, TC412 code, Hydraulic drive load pump, weight indicator, Pullmaster HL-25 working winch, PL-5 catline winch, working floor, rod basket, Hiab 033T crane, recent level four inspection,

    More Details   Used Vehicle